archive-de.com » DE » E » EVERT.DE

Total: 194

Choose link from "Titles, links and description words view":

Or switch to "Titles and links view".
  • evert aether-physics and -philosophy
    some other kind exist e g like photons as brick stones of radiation and also some solid bodies are existing material hardy appearances Electron Movement At this part 03 Local Movement now are discussed these coarse pattern of movements in relation to universal movement As an example will serve the electron which can be a free separated appearance on the other hand is a brick stone of diverse chemical elements like discussed at later parts At earlier workouts I often compared the aether with a monolith in order to demonstrate the property of a gapless solid body Even a monolith appears stable inside everything is moving atoms and molecules are trembling within their grid structures electrons run around the nucleus and also the nucleus are full of motions so I thought there could exist movements of most diverse patterns within an aether monolith By detailed considerations however it got obvious many movement pattern are not possible e g all common movements of the material appearances are impossible like discussed at previous part Lastly only one possible pattern of movements did remain and I was shocked and now did understand intuitive reservations of most readers and discussion partners versus my strict opinion concerning the aether continuum Could the obvious variety of material occurrences be constructed by only one type of brick stone That movement pattern well could exists in diverse sizes however e g all atoms should be build by only that uniform movement element On the other hand was stated laws all times are strict limitations eliminating most possibilities often reducing to one single case Instead of many kinds of materials was detected all chemical elements are build by rather few different brick stones and it was stated here lastly all sub elementary particles are no hardy bodies but are

    Original URL path: http://www.evert.de/ap0301e.htm (2016-02-09)
    Open archived version from archive


  • evert aether-physicd and -philosophy
    waves in reality exist of turning movements Waves at a water surface indeed produce the impression of water masses running ahead however waters in principle stay stationary and are only moving at circled tracks This animation shows an even smaller section with that wave rolling from right to left side The obvious appearance are water is moving from right to left side however in reality the water downside is resting and further upward the connecting line of neighbouring water parts is swinging at circled tracks Very deep Effect Water parts can shift alongside each other Nevertheless the water masses between the connecting lines should be constant i e should show same cross sectional surface all time This picture of submarine movies with swinging seaweed is well known and the distances between these trees should be constant all times At this picture however it s obviously not the fact So the points of resting water should be much deeper The appearance of a wave at the surface thus practically is only a symptom of much wider water movements in much deeper regions This insight is rather important for movements of the aether because within the aether no parts can shift alongside inner border surfaces Within the aether thus each wide movement analogue to the wave at a water surface demands rather large area of balancing movements by really astronomic relations e g by millions larger distances Different Speeds The water at the surface storms ahead rather fast at least the water mountains while the water downside swing back relative slow This process is not to achieve by simple circled movement like at picture upside because this turning movement would simply turn with constant speed at a constant radius Different speeds at different radius demand an overlay of circled movements Some samples are shown at picture 03 02 03 At A are marked diverse positions of a water particle during the movement process blue points This part of water is turning at a rather short radius E It s turning point F by itself is moving at a circled track with rather long radius around second turning point G Resulting of these both overlaying turning movements is a spiral track blue and grey of that water particle The speed of each section of the track is marked by different distances between the points Upside are overlaid both movements showing momentary to left side i e there the water moves fast to left side Downside however the turning at short radius shows into opposite direction of the turning at long radius so the water down there moves slowly back to right side So movements of sea waves are not only simple circled movements but real movement pattern resulting by overlays of at least two circled movements This movement system shown at A now is overlapped by analogue movement s pattern at both sides thus not only next to left and right side but real overlaps continuously where each neighbouring movement is phase shifted

    Original URL path: http://www.evert.de/ap0302e.htm (2016-02-09)
    Open archived version from archive

  • evert aether-physics and -philosophy
    only the right surface blue and a part of the front surface green All side surfaces are shaped like twisted parallelograms This body is arranged that kind the side lines show 45 degree to the bottom lines This angle is marked by D By the view top down this line shows 22 5 degree to the edge line of the bottom surface This angle is marked by E Deformed Cubes Now this body should be deformed however without changing the volume At H is shown the new view from right side The frontside edge left there is dropped a little bit the backward edge right is lifted correspondingly Both other edges rest at their original level so the average height of the body is constant and thus also the volume is unchanged At G is shown this tilting aside of the upper surface frontside down backside up is only possible if the upper surface is shifted to right side same time the upper surface no longer rests central above the bottom surface so the graph G is not symmetric At F this new shape of the body is drawn by diagonal view where the frontside edge has moved some down and back edge has move some up Same time the axis between bottom and upper surface now is tilt to right side The following picture shows the reasons for that coupling of both right angled movements Tangens 45 Degrees t picture 03 03 04 at B once more is shown the starting situation like at B of previous picture with the upper surface red symmetric above the bottom surface yellow Upside at A is drawn the frontside line between upper and bottom surface corresponding to B downside This line shows 45 degree to the bottom so the height H between upper and bottom surface is like the horizontal distance L between the edge points upside and downside At C now this line is drawn by some smaller angle so the height HR of this edge of the upper surface is reduced and the distance LE between the edge points is enlarged correspondingly By view top down the new position of this edge is marked by D Opposite now at E is lifted the opposite edge by same angle so the height HE is enlarged and the distance LR between the edge points is reduced By view top down the new position of this edge of the upper surface is marked by F So by this tilting of the upper surface not only both edge points did change their height but both are shifted to right side by same size So also both other edge points by view top down left and right now are shifted to new positions G while their height is unchanged thus these edges did only swivel like previous sloped bodies Tilting of the upper surface inevitably results a shifting aside Naturally also a shifting of the upper surface vice versa would force a tilting of the

    Original URL path: http://www.evert.de/ap0303e.htm (2016-02-09)
    Open archived version from archive

  • evert aether-physics and -philosophy
    at two dimensional view top down these lines appear of different lengths If now a strongly bended curve should become less bended the connecting line of opposite side must become stronger bended Point of intersection of all curves thus can be moved at central marked circle while all outside black points are not involved These are decisive characteristics of all local movements within the aether motion within an area is well possible while the border of the area keeps stationary All times near to the centre of the area is much more motion than at outer parts of the area It will never occur a rotating around but only swinging movements at circled tracks are possible This animation shows the general process of all local movements within the aether There is no circling around an axis but central aetherpoints are only swinging parallel around the centre That motion at the center is comparable with a wobble disc resp swinging sander where e g the right border all times keeps right side The central aetherpoints show relative strong swinging motions which become smaller distance towards outside until the resting aether at the border thus the swinging is fading towards outside These differences of movements are equalised by changing shape of the connecting curves which here are only drawn by view top down Sea Waves Roundabout The comparison of sea waves is to mention once more like earlier discussed e g at picture 03 02 01 All outside resting points correspond to stationary waters far below the water surface From there bended connecting lines guide upwards to the surface Here the whole water surface is concentrated within one point of intersection i e these sea waves fictively are arranged around that centre The wave of the water surface here is swinging around the central marked circle The differing distances between calm area outside and central area in motion are equalised by the swinging of the connection curves differently bended Nucleus and Balancing Area An other characteristic criteria of local aether movements becomes obvious there is a centre of motion here marked by central circled surface however there is much more motion demanded within far reaching surrounding area like sea waves at the water surface represent only small a part of all involved waters in motion These balancing areas outward to the resting aether is much larger than the core Here the bending of connecting lines and the central nucleus of motion are extremely overdrawn in the graphs In reality the connecting curves are only minimum differing and the balancing area is wider than the core by many scales e g like the diameters of the Sun in relation to whole Sun system Dislocation of Aetherpoints At picture 03 04 03 the dislocation of bended connecting lines is shown once more Here only one connecting line is drawn by view top down i e without its bending into third dimension The black points left and right side represent Free Ether relative stationary one

    Original URL path: http://www.evert.de/ap0304e.htm (2016-02-09)
    Open archived version from archive

  • evert aether-physics and -philosophy
    shorter From west to north the distance again is longer from north to east the distance again is some shorter So the swinging around can not occur by constant speed or the track of that aetherpoint can not be a pure circle At C is shown a cross sectional view through that movements disc At east E the aetherpoint is upside of the axis at west it s below at south and north thus the aetherpoint can not be exact at the level of the axis So the new track would show a shape like the border of hat bended upward one side and bended downward opposite side At D schematically is shown the aetherpoint could walk the long distances some inside and make some excursions at section of short distances The track thus would be no pure ellipse but a deformed circle with depressions and extensions The real tracks of local aether movements will be compromise in shape of diverse spiral track sections Wheel or Wave At previous pictures this swinging around a horizontal axis was symbolized by little blue wheels It was assumed the wheels would turn left by view from outside to the centre and would turn at all four directions resp towards all sides by likely sense Involved problems schematically are shown at picture 03 05 04 At A are drawn three left turning wheels where between the wheels a counter turning movements exists see arrows So there would come up rubbing within the aether This kind of neighbouring turnings can not exist in gapless aether Within the aether continuum can only exist relative synchronous swinging movement By example of some wheels this possibility is demonstrated at B C and D Three wheels are connected with a rod e g like drive wheels of steam engine All three wheels turn same sense here e g from 12 via 11 to 10 o clock position so all points at connecting line swing parallel to each other At this picture at E are drawn twelve wheels instead of previous stable rod now combined by a bended connecting line of neighbouring ether points This connecting curve is mounted at each wheel at next position here each hour of clock All wheels now can turn synchronously and the connecting line will appear like a wave running from right to left visualized by that little animation Above this here once more is demonstrated the essential difference between turning around and swinging movement turning around an axis is common within the material world swinging at circled track resp at overlaid circles of different axis and radius is the exclusive movement possibility within aether by itself This animation also shows clearly towards outside come up impressions or occurrences or effects while their real movement pattern is quite other kind here one can see absolutely clear a wave running from right to left however one must watch exactly to recognize twelve clock hands synchronously are turning each at its only small area So the

    Original URL path: http://www.evert.de/ap0305e.htm (2016-02-09)
    Open archived version from archive

  • evert aether-physics and -philosophy
    up to now was simply drawn as a cone with straight connecting lines Now the objective of this chapter is description more detailed of these movements along the vertical axis At picture 03 06 02 are shown four still frames of previous animation At A the observed aetherpoint red is positioned upside of the X axis and the connecting line there marked blue also shows a high upward bow At B and C this aetherpoint swings to left side and the strong bow of the connecting line is shifted ahead left side At D the aetherpoint is below the X axis and the connecting line is strongly bended also downwards Transport of Material The blue high mountain at A right side becomes a flat hill at D The original small blue hollow left side at A becomes a deep valley at D Synchronously to the circulating wave of previous chapter thus some material must be shifted via the poles towards left respective opposite to right side Naturally this motion is not done by linear movement to and fro but by a swinging motion around the vertical axis At picture 03 06 04 at A once more previous starting situation is drawn thus with the observed aetherpoint right upside X axis The connecting line along this axis is marked blue Cross to this axis is drawn the Z axis and the corresponding connecting line is drawn grey Now also are drawn the vertical Y axis and the connecting line red between north and south poles If momentary the aether volume is at the blue hill material had to be lifted from downside up thus the red connecting line downside shows a bow to right side Opposite upside of the blue mountain some aether volume had to escape thus the upper part of the red connecting line is dented resp bended to left side At this picture at B the observed aetherpoint has moved to left side There is drawn the blue connecting line now with valley left side and also the red connecting line of the Y axis This vertical connecting line at its upper part now is bended left side towards the deep blue valley while the lower part of red connecting line is dented to right side Naturally connecting lines exist from all points of Free Aether to the observed point Here are drawn black only some lines at this X Y plane between the blue and red connecting lines So at this local transport of materials is involved the total surrounding area practically a sphere shaped space of local aether movement of which here is drawn only a cross sectional view onto X Y plane Rolling around vertical Axis At picture 03 06 05 the space of the local aether movement is drawn as a yellow sphere by diagonal view onto the central inclined plane of the swinging track Pointed out red is the movement only around the vertical axis however extremely overdrawn At this picture left side

    Original URL path: http://www.evert.de/ap0306e.htm (2016-02-09)
    Open archived version from archive

  • evert aether-physics and -philosophy
    does not fit by diverse points Water is material occurrence and exists by parts Within flux threads the water molecules are neighboured and do likely or analogue motions Between water molecules is nothing by common understanding so the whole flux threads can shift alongside each other without problems So previous water surface can tilt some water molecules can run ahead and some molecules stay simply behind Here however the aether is assumed to be gapless coherent unit without any space between parts so the aetherpoints stick to their neighbours all times Within the aether one point can not rotate around an axis like the water molecules here are dancing around the longitudinal axis of the pipe The aetherpoints keep same side of neighbours all times they can only swing parallel to each other by more or less speeds So this comparison could only point out each bending also of fluid particles synchronously demands tilting right angled here the longitudinal axis is bended to left side and resulting of is a tilting backside up and frontside down of the water surface So this inevitable synchronization of movements into two directions right angled to each other not only exists at previous steel grid construction of that twisted cube but also within liquids and gases A grave difference however is material parts can wander through space long distances e g water can flow through previous pipe or within rivers for thousands of kilometres or air can run around whole globe The aether however is locally resting resp is swinging only at relative limited areas the whole Free Aether only at quant small Universal Aethermovement the Bounded Aether only within locally limited Potential Vortex Clouds So local aether movements are not to compare with flowing water through previous pipe Right Angles At picture 03 07 03 once more these coupled motions are demonstrated schematically The space is marked by X Y and Z coordinates An originally straight connecting line is bended to left side marked blue at A By previous considerations that tube is to bend only if same time it s bended right angles to this direction This second bending within the Z plane here at B shows forwards thus right angled to first bending At C is shown the addition of both bends As the bending increases from bottom to top a spiral line results as a curve bended same time into the third dimension as marked at D This three dimensional bending from original vertical straight connecting line to the grey 3D curve is drawn once more at this picture at right side The bending results a shorter distance between the X axis and the upper end of the curve The process of this bending thus is result of synchronous movement towards left ahead down like marked at E However the bending as a side affect no results an other change at the inner side of the curve now is too much aether while at the outer side of the curve

    Original URL path: http://www.evert.de/ap0307e.htm (2016-02-09)
    Open archived version from archive

  • evert aether-physics and -philosophy
    Free Aether works as a motor reinforcing the amplitudes of connecting lines At C the red point moves to right side now also the Free Aether momentary moves into likely direction Also here comes up stress because the connecting line wants to move further to right side than Free Aether allows Also here the connecting line further inside must avoid the conflict by swerving out marked by blue arrow showing upwards The Potential Vortex Cloud at this moment affects a thrust towards right side onto the Free Aether located there into its momentary direction Thus earlier delay of the Free Aether motion see following situations is compensated At the other hand the Free Aether indeed could take gradually the characteristic of the movement pattern of the connecting line as this pressure towards right side in addition with the upward component results a motion more stretched diagonal to both arrows here right side up At D now the connecting line and the Free Aether are both moving towards left side however different long ways The Potential Vortex Cloud affects a pulling force onto the Free Aether Either the curve of the connecting line becomes flatten blue arrow downwards or the previous adaption of Free Aether motion of situation C now is compensated resp enforced once more as this point again swings at a track more stretched into direction of both blue arrows here diagonal down left side At E both movements are contrary The Potential Vortex Cloud still affects previous pulling force so now the straightening of the connecting line is inevitable marked by thick arrow downward This situation again results more intensive amplitudes thus enforces the swinging motions within the Potential Vortex Cloud Energy The Free Aether works as a motor not only like a buffer situation B affecting stronger bending of the connecting lines but also as a brake system situation E affecting stronger back swinging resp stretching of the connecting lines Same time the internal pressure and pulling forces are back affecting onto the Free Aether So in total the Free Aether motions are not weakened by the embedded Bounded Aether On the other hand the motion pattern of the Free Aether gradually from outside to inside by minimum steps is merging into the motion pattern of the Potential Vortex Cloud By these considerations this motor works force neutral Within the boundary areas occur changes of movement directions normally demanding a corresponding input of forces by known physical understanding However remember e g the spokes of a wheel affect a steady change of the direction of the rim masses without demanding an input of forces This redirection is simply done by tension within the material of the spoke by cohesion only by passive resistance by static not moving within spoke Here within the aether exists just this indispensable cohesion is the decisive property Thus any stress within the aether by pressure or pulling forces immediately results changes of motion directions without any friction losses There is no smallest

    Original URL path: http://www.evert.de/ap0309e.htm (2016-02-09)
    Open archived version from archive



  •