archive-de.com » DE » D » DSL-ELECTRONIC.DE

Total: 130

Choose link from "Titles, links and description words view":

Or switch to "Titles and links view".
  • Kontaktformular - DSL - electronic ® GmbH
    etc schreiben können Wir würden uns freuen wenn Sie uns Ihr Anliegen möglichst detailliert schildern würden somit ist eine schnellere Bearbeitung Ihrer Anfrage gewährleistet Unser Datenschutzerklärung finden sie hier Datenschutzerklärung Rotmarkierte Felder sind Pflichtfelder Firma Anrede Straße Nr Name Land

    Original URL path: http://www.dsl-electronic.de/kontaktform.php (2016-02-10)
    Open archived version from archive


  • Ihre Meinung ist uns wichtig! - DSL - electronic ® GmbH
    Es trat ein Fehler auf Sie haben den Sicherheits Code falsch eingeben versuchen Sie es bitte erneut DSL electronic GmbH 2016 Datenschutzerklärung AGB Kontakt Impressum

    Original URL path: http://www.dsl-electronic.de/yourvote.php (2016-02-10)
    Open archived version from archive

  • Kontaktformular :: Security-Code Hilfe - DSL - electronic GmbH
    eintragen Gelesen werden die Zeichen von links nach rechts Also hier im Beispiel wäre es dieser Code eoffu bei unserem Sicherheits Code gibt es alle Zeichen von a k m z und 1 9 Die 0 und das kleine L sind wegen der großen Verwechslungsgefahr ausgeschlossen Bitte geben Sie den Sicherheits Code nur in Kleinbuchstaben ein Sollte ein Code doch mal für Sie schwer zu erkennen sein liegt es an

    Original URL path: http://www.dsl-electronic.de/scode_help.html (2016-02-10)
    Open archived version from archive

  • DSL-electronic ® GmbH - News
    Produkt Das UFR1001E bietet eine schnelle Netzfehlererkennung Dabei wurde gleichzeitig auf bewährte Funktionen wie passive Inselnetzerkennung 10 minütige Mittelwertbildung Vektorsprung und ROCOF Rücksicht genommen Dank der 12 voreingestellten Grundprogramme ist die Inbetriebnahme des Schutzrelais sehr einfach Das UFR1001E bietet einen Alarmspeicher für einhundert Meldungen Auslösewert Ursache und rel Zeitstempel Durch einen Freigabeeingang kann eine Fernabschaltung realisiert werden z B Rundsteuerempfänger Weiterhin besitzt das Relais fünf Meldeausgänge zur Weiterleitung der Schaltursache an übergeordnete Systeme SPS Durch die universale Versorgungsspannung von 20 270 Volt AC DC ist das UFR1001E weltweit einsetzbar Konformitätsnachweise für Niederspannung VDE AR N4105 und Mittelspannung bdew Richtlinie zur Vorlage beim örtlichen Energieversorger EVU liegen selbstverständlich vor Angehängte Datenblätter PDF UFR1001E Für weitere Informationen steht Ihnen unser technischer Vertrieb gerne zur Verfügung Neue Produkte 2 Zonen Lichtbogenüberwachungrelais AF0500 12 04 2015 Highlights Sehr schnelle Lichtbogenerfassung in weniger als 1ms 4 Sensoreingänge aufteilbar auf zwei IGBT Ausgänge 2 Zonen Punkt und faserotische Sensoren verfügbar Anschluss von Punktsensoren und Lichtwellenleiter auch im Mix möglich Mehrere Systeme sind zu einem System kaskadierbar Permanente Selbstüberwachung des Relais und der Sensoren On Board Ereignisrekorder zur Systemdiagnose Einfache Installation und Konfiguration über den PC USB Bus 2 Ethernet Schnittstellen mit Modbus TCP Protokoll Weitbereichsnetzteil 100 240VAC 24 48VDC 110 250VDC UL zertifiziert Die DSL electronic GmbH präsentiert das neue 2 Zonen Lichtbogenschutzrelais AF0500 Der Lichtbogenwächter AF0500 arbeitet mit neuester Sensortechnologie Das AF0500 versorgt bis zu 4 Sensoren jede Kombination aus optischen Punktsensoren und faseroptischen Sensoren ist möglich Zusätzlich können je zwei Sensoren auf zwei unabhängige IGBT High speed Ausgänge verteilt werden Bereichsauslösung Mehrere AF0500 Relais können zu einem System miteinander vernetzt werden um die Kanalanzahl zu erhöhen Die neue Sensortechnologie bietet kontinuierliche Überwachung der Sensoren so dass jeder Fehler in der Kommunikation mit einem Sensor erkannt und gemeldet wird Auch dem Internet der Dinge Industrie

    Original URL path: http://www.dsl-electronic.de/news.php?section=newsde (2016-02-10)
    Open archived version from archive

  • Battery Charging Units - Power Supply Units - DSL-electronic ® GmbH
    10A AL1524 PF 231 400V Outp 24V 15A AL2024 PF 231 400V Outp 24V 20A AL3524 PF 231 400V Outp 24V 35A The battery charging unit with Power fail contain a battery undervoltage monitor with relay output closed contacts in power on and open contacts in power off or fault situation as option Additionally the relay output switches after supply undervoltage or internal faillure of charger unit Through it the customer get a very good safety against discharging of his starting and control batteries Normally the power fail signal will be delayed in progamming units or a separate time relay Battery Charging Unit 35A AL3524 Safe battery charging via professional thyristor technologie High efficiency 80 90 Softstart Heavy charging up to 33V Charging characteristics acc to DIN 41773 Short circuit proof Overcurrent limitation Can be used up to 55 C automatic current limitation at excessive temperature unit continues at reduced power Download data sheets PDF AL3524 231 400V Outp 24V 35A This charging unit is offered in an open design is used for charging batteries and for supplying connected DC circuits and is mounted in switchgear cabinets As a result of its high efficiency the unit has low self heating thus achieve high reliability and a long service life The batteries connected are supplied with a constant final charging voltage acc to DIN regardless of external temperatures and mains fluctuations Integrated protective measures against short circuit and wrong pole connection ensure safe operation of battery charging unit Primary Switched Battery Charging Unit Power Supply GL0524 GL1012 Battery charging and low voltage supply on the top hat rail State of the art switching power supply technology with PFC voltage range 176 264VAC Output adjustable short circuit proof Environmental temperatures up to 60 C durable convection heating Interference suppression acc to DIN curve B Low output ripple 80 mV Charging characteristics acc to DIN 41773 Download data sheets PDF GL0524 176 264VAC 24V 5A GL1012 176 264VAC 12V 10A The GL0524 GL1012 is used for charging lead nickel cadmium batteries with prescribed characteristic and or for supplying 24V circuits The unit is fixed to the top hat rail and its high efficiency allows it to be operated with convection cooling thus allowing a ventilator with an unpredictable service life to be dispensed with The battery charging unit power supply has a temperature compensated final charging voltage wth the option of adjustment during operation As a result of its low self heating the unit has a high degree of operating safety Primary Switched Battery Charging Unit Power Supply GL1024 Battery charging and low voltage supply on the top hat rail State of the art switching power supply technology with PFC voltage range 85 264VAC Output 24 28V adjustable short circuit proof Environmental temperatures up to 60 C durable convection heating Interference suppression acc to DIN curve B Low output ripple 100 mV Charging characteristics acc to DIN 41773 Download data sheets PDF GL1024 85 264V Outp 24V 10A The GL1024 is used for

    Original URL path: http://www.dsl-electronic.de/uk/batterieladegeraete.php (2016-02-10)
    Open archived version from archive

  • Protective Units
    and underfrequency and for over and undervoltage Download specifications PDF VECFU5 3 4 conductor 231V 400V 45 70Hz Cl 0 5 VECFU5 with R O C O F This unit protects the generator when phase jumps occur in mains parallel operation and constantly monitors the 3 phase mains voltage applied and the mains frequency in mains parallel operation The output contacts for phase jump undervoltage and underfrequency are switched as working contacts which automatically switch off the system when undervoltage or underfrequency errors occur As the rapid switch off provided by the phase monitoring function causes the unit to immediately disconnect from the mains there is no short circuit switch off with subsequent total failure so the system can be automatically reconnected to the mains after a certain mains settling time Mains Generator Protecting Relay VECFU1 discontinued Rapid phase jump triggering within 10 50ms Threshold value notification under overvoltage of each single phase normally closed contact and LED Threshold value notification of under overfrequency with normally closed contact and LED Optimum generator protection for mains failure in parallel Operation Easy adjustment of the parameters Phase jump detection between 1 and 20 degrees Adjustable mains stabilization time for mains return Download data sheets PDF VECFU1 4 conductor N 231V 50Hz 20 This unit protects the generator when there are phase jumps in parallel operation and constantly monitors the 2 phase mains voltage applied and the mains frequency The output contacts are switched as normally open contacts so that the system swiches off automatically when faults occur As a result of the rapid switch off short circuit switch off with subsequent total failure does not yet take place so the system can be automatically connected to the mains again after a mains stabilization time Mains Generator Protection Relay VEC100 discontinued Rapid phase jump triggering within 10 50ms Optimum generator protection for mains faillure in parallel operatio Phase jump detection between 1 and 20 degrees Adjustable mains stabilization time for mains return Note Only 2 conductors L N or L L are required to detect the phase jump as frequency and phase changes occur on all phases with the same magnitude One phase monitoring of teh three phase mains is thus completely sufficient Download data sheets PDF VEC100 2 conductor 231V 50Hz The unit protects the generator when there are phase jumps in parallel mains operation The output pads are switched as normally open contacts so that the system switches off automatically even at mains faillure When the preset phase jump value is exceeded the output contact opens within 10 50ms As a result of the rapid switch off short circuit switch off with subsequent total faillure does not yet take place so the system can be automatically connected to the mains again after a mains stabilization time Reverse Power Time Relay RLZ110 RLZ113 RLZ150 RLZ153 Real reverse power measurement throught four quadrant detection Precise triggering even in extreme phase position cos phi Setting range 2 20 reverse power Delay of triggering 1

    Original URL path: http://www.dsl-electronic.de/uk/schutzgeraete.php (2016-02-10)
    Open archived version from archive

  • Function Monitoring Unit - DSL-electronic ® GmbH
    0 05 the unit is also suitable for monitoring the mains frequency in interconnected networks The frequency monitor has an easy to use menu interface with an LCD display The settings can be reprogrammed by the user during operation of the unit Frequency Monitor AFW100 discontinued Two stage frequency monitor for 50Hz network application Underfrequency and overfrequency adjustable individually Continuous setting range 20 LED displays for exceeding of values set Separate output via 2 output relays Two way output contacts Download data sheets PDF AFW100 231V 50Hz The unit is used for detecting the mains frequency or generator frequency especially for frequency monitoring in free running networks The underfrequency relay is active at the rated frequency and the overfrequency relay is not switched through The unit is supplied with an auxiliary voltage via the measuring voltage Speed Controller Remanence Frequency Relais 0 5 70Hz RFR500 2 way frequency monitoring with seperate output relay Digital displaying of actual frequency in Hz High accuracy of monitoring better 0 05 Event displaying of switch point overdrive Changing and displaying of setting values on LCD with bright contrast setting possibility of 2 frequency switch points with hysteresis and switching delay setting values to change by easy menu handling saving into eeprom 5 264VAC input range of measuring voltage Download data sheets PDF RFR500 0 5 70Hz 5 264VAC Auxiliary Voltage 24VDC The speed controller RFR500 is used to monitor the starting frequency and rated frequency of generators or gensets With channel 1 the frequency will be monitored during starting of genset under low mains voltage until the start frequency 10 30Hz reached end of start by swiching of relay 1 starting mashine will be stoped The 2 channel monitors the rated frequency 50Hz and is i e set to 49 9Hz With this there is also a monitoring for underfrequency during normal running The change of switchpoints for frequency hysteresis or of switching delay 10ms 60sec may be changes during normal running easy programming and will be used after storing into eeprom The auxiliary voltage 24VDC will be get from battery other supply voltages are available on request Asymmetrical Load Monitoring Unit SLW150 3 phase load current recording Differential current evaluation in percent Trigger range 5 15 of the instantaneous average value Switching delay 0 2 5 sec LED displays for exceeding and triggering Two way output contacts Auxiliary voltage 231VAC or 24VDC Download data sheets PDF SLW150 3 phases with 5A IR each The unit is usually used for motor generator protection in 3 or 4 wire AC mains networks It records the current of each individual wire and compares them with the average value for all three phases In the case of undershooting or overshooting of a phase in comparison with the deviation in set 5 50 the internal time circuit is triggered on completion of which the relay switches through Rapid Voltage Monitor ASW500 ASW503 Two stage 3 4 wire phase voltage monitoring Short release time 50ms after undershoot or overshoot

    Original URL path: http://www.dsl-electronic.de/uk/funktionswaechter.php (2016-02-10)
    Open archived version from archive

  • Control Units
    could be preset The electronic potentiometer have got a potential separation between inputs power supply and output connections So sensitive inputs of control units are not affected by earth wiring or others In the other way the output of EMP500 is short circuit proof and the unit has a large power supply range Peak Load Controller LR5500 Compact control for generator power control 0 20mA input for the actual power value Setpoint adjuster for maximum minimum and reverse power Relay contacts for exceeding of the setpoint values Power control contacts for Up and Down Switching inputs for selecting peak load operation External setpoint potentiometer can be connected Download data sheets PDF LR5500 0 20mA 231V aux voltage The unit is used for the peak load control of generators in mains parallel systems The input value for the unit shown here is the actual power value 20mA 10V and the feedback from the generator switch and the mains switch The selection information for parallel operation and back synchronization also come from the user interface The setpoint value can be set at the unit or via an external potentiometer The unit has output contacts for minimum power setpoint value and reverse power Output contacts with adjustable pulse pause times are available for running the generator up and down Also all states and functions are displayed optically via LED s Three Point Controller LR5510 LRG100 Setpoint controller for generator power control 0 20mA input for the actual power value Setpoint adjustable internally or via external potentiometer Output with control contacts Up and Down Setting of a dead zone for control stabilization Download date sheets PDF LR5510 Setpoint 0 20mA 231V aux LRG100 Ext setpoint 0 20mA 231V aux This three point controller is used for power control in generators In the LR5510 the

    Original URL path: http://www.dsl-electronic.de/uk/steuergeraete.php (2016-02-10)
    Open archived version from archive



  •